OTS/OTSIncAMeasureApp/0-OTSModel/Measure/GetBSEPic/CMsrThread.cs

using System.Collections.Generic;
using OTSDataType;
using System;
using System.Drawing;
using static OTSDataType.otsdataconst;

using OTSModelSharp.ImageProcess;
using OTSModelSharp.ServiceInterface;

namespace OTSModelSharp
{


    // enum and struct used for send message to App
    public enum ENUM_MSG_TYPE
    {
        MTHREADSTATUS = 1001,
        MSAMPLESTATUS = 1002,
        MSAMPLERESULT = 1003
    };


    public enum MSAMPLE_RET
    {
        BSE_DATA = 0,
        FIELD_DATA = 1,
        START_MSR_FIELD = 2

    };

    public struct SMSR_COMPLETE_DATA
    {
        public OTS_MSR_THREAD_STATUS MsrStatus;
        public string csMsrStartTime;
        public int iMsrCompleteSampleCount;
        public int iMsrCompleteFieldCount;
        public int iParticleCount;
        public TimeSpan MsrUsedTime;
        public string csMsrEndTime;
    };



    public struct STMThreadStatus
    {
        public OTS_MSR_THREAD_STATUS iMsrStatu;        //OTS_MSR_THREAD_STATUS
        public string csMsrStartTime;   //MSR_START_TIME
        public string csMsrEndTime;     //MSR_END_TIME
        public SMSR_COMPLETE_DATA SMsrCompleteData;
    };
    public struct STMSampleStatus
    {
        public OTS_MSR_SAMPLE_STATUS iMsrSampleStatu;    //OTS_MSR_SAMPLE_STATUS
        public string cSampleName;
        public string csSampleMsrStartTime;
        public List<Point> BCompleteFieldList;
    };


    public struct STMSampleResultData
    {
        public MSAMPLE_RET iRetDataType;                 //ENUM_MEASURE_SAMPLE_RESULT

        public struct RBSEDATA
        {

            public System.Drawing.Point pos;
            public int iBSEDataHeight;
            public int iBSEDataWidth;
            public byte[] lpBSEData;
        };

        public struct SAMPLEFIELDDATA
        {
            public System.Drawing.Point FieldPos;
            public int iMeasureFieldCount;
            public int iCompleteFieldCount;
            public int iSParticleCount;     // Field particle count
            public TimeSpan TUsedTime;
        };

        public struct StartToMsrField
        {
            public System.Drawing.Point FieldPos;
        };

        public RBSEDATA BSEData;
        public SAMPLEFIELDDATA SFieldData;
        public StartToMsrField SMsrField;
    };

    public  struct ST_MSTMsg
    {

    
      public ENUM_MSG_TYPE iMsgType;
      public   STMThreadStatus STMThreadStu;
      public   STMSampleStatus STMSampleStu;
      public   STMSampleResultData STMSampleRetData;


    };
    
    public class CMsrThread
    {
      
        private const string UNTITLED_FILE_NAME = "Untitled";
        public delegate void   ProgressEventHandler(ST_MSTMsg msg);
        public event ProgressEventHandler ProgressEvent;
        COTSMsrPrjResultData m_pProjData;
        List< COTSSample> m_listMeasurableSamples;
        string m_strWorkingFolder;
        CMsrThreadStatus m_ThreadStatus;
       
       
       SemController m_SemController;// there is no correspondense clr,so use this instead temporarilly
        protected static NLog.Logger loger = NLog.LogManager.GetCurrentClassLogger();


        public CMsrThread()
        {         
            m_strWorkingFolder = "";
            m_ThreadStatus = new CMsrThreadStatus();
          
          
            m_SemController = new SemController();
           

        }

       
            public COTSMsrPrjResultData GetProjResultData()
        {
            return m_pProjData;
        }
        public ISemController GetSEMController()
        {

            // get SEM, scanner and x-ray controller via hardware manager
            return m_SemController;
        }
     

        public CMsrThreadStatus GetMsrThreadStatus() { return m_ThreadStatus; }
       public  void Init(COTSMsrPrjResultData a_pProjMgrFile)
        {
            m_pProjData = a_pProjMgrFile;
            m_listMeasurableSamples = a_pProjMgrFile.GetSampleList() ;
            return ;
        }
        void ThreadOver()
        {
            


            DateTime timeEnd = m_ThreadStatus.GetEndTime();

             ST_MSTMsg MsrMsg = new ST_MSTMsg();
            MsrMsg.iMsgType = ENUM_MSG_TYPE.MTHREADSTATUS;
         
           MsrMsg.STMThreadStu.iMsrStatu = m_ThreadStatus.GetStatus();
               

            MsrMsg.STMThreadStu.csMsrEndTime = timeEnd.ToShortDateString();
          
            ProgressEvent(MsrMsg);
            //disconnect the semcontroller when we exit this task.
            m_SemController.DisConnect();
        }
        void SetWorkingFolderStr()
        {
            // get project file pathname
            string  strSettingFilePathName = m_pProjData.GetPathName();
            strSettingFilePathName.Trim();

            if (strSettingFilePathName == "")
            {
                loger .Error("SetWorkingFolderStr: project file pathname is an empty string");
                return ;
            }
            else if (strSettingFilePathName==UNTITLED_FILE_NAME)
            {
                loger .Error ("SetWorkingFolderStr: project file pathname is an invalid string");
                return ;
            }

            // working folder string
            string  strWorkingFolder =FileHelper.GetFolderName(strSettingFilePathName);


            // set working folder string
            m_strWorkingFolder = strWorkingFolder;

            // ok, return TRUE
            return ;
        }
       public void SendMessageToMeasureApp(ST_MSTMsg msg)
        {
            ProgressEvent(msg);
        }
        public bool IsMeasureStopped()
        {
            return m_ThreadStatus.GetStatus() == OTS_MSR_THREAD_STATUS.STOPPED;
        }

        public bool  IsMeasureRunning() { return m_ThreadStatus.GetStatus() == OTS_MSR_THREAD_STATUS.INPROCESS; }
        public bool  IsMeasureFailed() { return m_ThreadStatus.GetStatus() == OTS_MSR_THREAD_STATUS.FAILED; }
        public bool  IsMeasureCompleted() { return m_ThreadStatus.GetStatus() == OTS_MSR_THREAD_STATUS.COMPLETED; }
        public   void DoMeasure()
        {
            // start measurement, creat thread measure status class, let the main thread know that measurement started


             SortedDictionary<string , CSmplMeasure> mapSmplMsr=new SortedDictionary<string, CSmplMeasure>();//use this map to hold all the smplMeasure object 

           
            m_ThreadStatus.SetStartTime(System.DateTime.Now);
            DateTime timeStart = m_ThreadStatus.GetStartTime(); 
            
            ST_MSTMsg MsgMsrStart=new ST_MSTMsg();
            MsgMsrStart.iMsgType  = ENUM_MSG_TYPE.MTHREADSTATUS;
            MsgMsrStart.STMThreadStu.iMsrStatu = OTS_MSR_THREAD_STATUS.INPROCESS;
            MsgMsrStart.STMThreadStu.csMsrStartTime = timeStart.ToShortDateString();

            ProgressEvent (MsgMsrStart);
            loger.Info("Measurement started!");
            // connect hardware
            loger.Info("Connect SEM!");
            if (!m_SemController.Connect())
            {
                loger .Error("DoMeasure: failed to connect hardware.");
                m_ThreadStatus.SetStatus(OTS_MSR_THREAD_STATUS.FAILED);
            
                m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);
                ThreadOver();
                return;
            }


            // set working directory which is the same directory of the setting file
            SetWorkingFolderStr();
     
        

            List <string >  listMeasuredSamples = m_ThreadStatus.GetCompletedSamples();

            // got through measure list
            foreach (var pSample in m_listMeasurableSamples)
            {// check and break if stop button is clicked 
                if (m_ThreadStatus.GetStatus()== OTS_MSR_THREAD_STATUS.STOPPED )
                {
                    // stop button clicked
                    loger .Info("DoMeasure: stop button is clicked.");                   
                    // record end time
                    m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);
                    ThreadOver();
                    return;
                }

                if (!pSample.GetSwitch())
                {
                    continue;
                }
             
                CSmplMeasure pSmplMeasure;
                if (!mapSmplMsr.ContainsKey(pSample.GetName()))
                {// create a sample measure object for the sample
                    switch (m_pProjData.m_nPackId)
                    {
                        case OTS_SysType_ID.IncA:
                            pSmplMeasure = new CSmplMeasureInclution(m_strWorkingFolder, pSample);
                            break;
                        case OTS_SysType_ID.CleanlinessA:
                            pSmplMeasure = new CSmplMeasureCleanliness(m_strWorkingFolder, pSample);
                            break;
                        default:
                            pSmplMeasure = new CSmplMeasureInclution(m_strWorkingFolder, pSample);
                            break;

                    }
                       
                  
                    
                    // set measure thread
                    pSmplMeasure.SetMsrThread(this);

                    mapSmplMsr[pSample.GetName()] = pSmplMeasure;
                }
                else
                {
                    pSmplMeasure = mapSmplMsr[pSample.GetName()];
                    pSample.GetMsrStatus().SetStatus(OTS_MSR_SAMPLE_STATUS.INPROCESS);
                    m_ThreadStatus.SetStatus(OTS_MSR_THREAD_STATUS.INPROCESS);
                }



               
               
                pSmplMeasure.DoMeasureForOneSample();


                // check if measurement is successful
                if (pSample.GetMsrStatus().GetStatus() == OTS_MSR_SAMPLE_STATUS.STOPPED)
                {// record end time
                    m_ThreadStatus.SetStatus(OTS_MSR_THREAD_STATUS.STOPPED);
                    m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);

                    // update thread measure status class, let the main thread know that this sample measurement stopped
                    ST_MSTMsg MsgSmpStop = new ST_MSTMsg(); 
                    MsgSmpStop.iMsgType = ENUM_MSG_TYPE.MSAMPLESTATUS;
                    MsgSmpStop.STMThreadStu.iMsrStatu= OTS_MSR_THREAD_STATUS.STOPPED;
                    MsgSmpStop.STMSampleStu.iMsrSampleStatu = OTS_MSR_SAMPLE_STATUS.STOPPED;
                    MsgSmpStop.STMThreadStu.csMsrEndTime = DateTime .Now .ToShortDateString();
                    MsgSmpStop.STMThreadStu.iMsrStatu= OTS_MSR_THREAD_STATUS.STOPPED;
                    ProgressEvent(MsgSmpStop);


                    ThreadOver();
                    return;
                }
			    else if (pSample.GetMsrStatus().GetStatus() == OTS_MSR_SAMPLE_STATUS.FAILED)
			    {
                    // measurement failed
                    m_ThreadStatus.SetStatus(OTS_MSR_THREAD_STATUS.FAILED);
                // record end time
                    m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);

                // update thread measure status class, let the main thread know that this sample measurement failed
                ST_MSTMsg MsgSmpFailed=new ST_MSTMsg(); 
              
                MsgSmpFailed.iMsgType = ENUM_MSG_TYPE.MSAMPLESTATUS;
				MsgSmpFailed.STMSampleStu.iMsrSampleStatu =  OTS_MSR_SAMPLE_STATUS.FAILED;                 

                   
                 ProgressEvent(MsgSmpFailed);
                ThreadOver();
				  return;
			    }

               // record end time
               m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);

              // update thread measure status class, let the main thread know that this sample measurement successes
               ST_MSTMsg MsgSmpSuccess=new ST_MSTMsg();           
              MsgSmpSuccess.iMsgType = ENUM_MSG_TYPE.MSAMPLESTATUS;
	          MsgSmpSuccess.STMSampleStu.iMsrSampleStatu = OTS_MSR_SAMPLE_STATUS.SUCCESSED;         
              ProgressEvent(MsgSmpSuccess);
                		

            // continue to the next sample
              listMeasuredSamples.Add (pSample.GetName());
		}

            // measurement completed
            m_ThreadStatus.SetStatus(OTS_MSR_THREAD_STATUS.COMPLETED);
            // record end time
            m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);

            ThreadOver();
	}

        // hole preview
       public  void DoHolePreview(int a_nHoleID, CDomain a_pMeasureArea)
        {
            // start measurement, creat thread measure status class, let the main thread know that measurement started
            // set measure status to in-process
            //record time
            m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.START);
            DateTime timeStart = m_ThreadStatus.GetStartTime();

  

            ST_MSTMsg MsgMsrStart = new ST_MSTMsg();
          
            MsgMsrStart.iMsgType = ENUM_MSG_TYPE.MTHREADSTATUS;
            MsgMsrStart.STMThreadStu.iMsrStatu =OTS_MSR_THREAD_STATUS.INPROCESS;
         
            SendMessageToMeasureApp(MsgMsrStart);
            // connect hardware
            if (!m_SemController.Connect())
            {
                // failed to connect hardware
                
                SetMsrLoopStatus(otsdataconst.OTS_MSR_THREAD_STATUS.FAILED);
                m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);
                ThreadOver();
            }

           
	
            
            COTSSample pSampleHole = CreateHoleSample(a_pMeasureArea);


            // create a sample measure object for the sample
            CSmplMeasure pSmplMeasure = new CSmplMeasureCleanliness(m_strWorkingFolder,pSampleHole);

          
            // set measure thread
            pSmplMeasure.SetMsrThread(this);

            // update thread measure status class, let the main thread know that this sample measurement starts
            // set working folder string
            pSmplMeasure.SetSample(pSampleHole);
            pSmplMeasure.SetWorkingFolder(m_strWorkingFolder);

            // do measure
            pSmplMeasure.DoHolePreview(a_nHoleID);

            // check if measurement is successful
            if (pSampleHole.GetMsrStatus().GetStatus() == OTS_MSR_SAMPLE_STATUS.STOPPED)
            {
                // record end time
                m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);
                // measurement stopped
                SetMsrLoopStatus(otsdataconst.OTS_MSR_THREAD_STATUS.STOPPED);

                // update thread measure status class, let the main thread know that this sample measurement stopped
                ST_MSTMsg MsgSmpStop = new ST_MSTMsg();
           
                MsgSmpStop.iMsgType = ENUM_MSG_TYPE.MSAMPLESTATUS;
                MsgSmpStop.STMSampleStu.iMsrSampleStatu = OTS_MSR_SAMPLE_STATUS.STOPPED;
          
                SendMessageToMeasureApp(MsgSmpStop);

                ThreadOver();
                return;
            }
            else if (pSampleHole.GetMsrStatus().GetStatus() == OTS_MSR_SAMPLE_STATUS.FAILED)
            {
                // measurement failed
                SetMsrLoopStatus(otsdataconst.OTS_MSR_THREAD_STATUS.FAILED);
                // record end time
                m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);

                // update thread measure status class, let the main thread know that this sample measurement failed
                ST_MSTMsg MsgSmpFailed = new ST_MSTMsg();
          
                MsgSmpFailed.iMsgType = ENUM_MSG_TYPE.MSAMPLESTATUS;
                MsgSmpFailed.STMSampleStu.iMsrSampleStatu = OTS_MSR_SAMPLE_STATUS.FAILED;
           
                SendMessageToMeasureApp(MsgSmpFailed);
                ThreadOver();
                return;
            }

            // record end time
            m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);

            // update thread measure status class, let the main thread know that this sample measurement successes
            ST_MSTMsg MsgSmpSuccess = new ST_MSTMsg();
         
            MsgSmpSuccess.iMsgType = ENUM_MSG_TYPE.MSAMPLESTATUS;
            MsgSmpSuccess.STMSampleStu.iMsrSampleStatu = OTS_MSR_SAMPLE_STATUS.SUCCESSED;
         


            SendMessageToMeasureApp(MsgSmpSuccess);

            // measurement completed
            SetMsrLoopStatus(otsdataconst.OTS_MSR_THREAD_STATUS.COMPLETED);
            // record end time
            m_ThreadStatus.ComputeTime(OTS_THREAD_TIME_TYPE.STOPPED);

            ThreadOver();
        }

      public  COTSSample CreateHoleSample(CDomain a_pMsrArea)
        {
            

            COTSSample pHoleSample = new COTSSample();

            pHoleSample.SetMsrArea(a_pMsrArea);

           

            // get min magnification
            CSEMStageData pSEMStageData = m_pProjData.GetSEMStageData();
            double dMinMag = pSEMStageData.GetMinMag();
            // get scan field size 100
            int nScanFieldSize100 = pSEMStageData.GetScanFieldSize100();
            // get working distance
            double dWorkingDistance = 0.0;
            if (!GetSEMWorkingDistanceFromHW(ref dWorkingDistance))
            {

                return null;
            }

            CSEMDataMsr poSEMDataMsr = new CSEMDataMsr();
            poSEMDataMsr.SetScanFieldSize100(nScanFieldSize100);
            poSEMDataMsr.SetWorkingDistance(dWorkingDistance);
            poSEMDataMsr.SetMagnification(dMinMag);

            pHoleSample.SetSEMDataMsr(poSEMDataMsr);

            // Set image scan param
            COTSImgScanPrm poImageScanParam = new COTSImgScanPrm();
            poImageScanParam.SetStopMode(OTS_MEASURE_STOP_MODE.CoverMode);
            poImageScanParam.SetStartImageMode(OTS_GET_IMAGE_MODE.FROM_CENTER);
            poImageScanParam.SetScanImageSpeed(OTS_THREE_TIES_OPTIONS.low);
            //poImageScanParam.SetImagePixelSize(OTS_FIVE_TIES_OPTIONS.TIE1);

            CSampleParam poMsrParams = pHoleSample.GetMsrParams();
            poImageScanParam.SetImagePixelSize(m_listMeasurableSamples[0].GetMsrParams().GetImageScanParam().GetImagePixelSize());//由于各样品分辨率应该一致，故此处没有读取选取的特定样品孔样品
            poMsrParams.SetImageScanParam(poImageScanParam);
            pHoleSample.SetMsrParams(poMsrParams);

            return pHoleSample;
        }

      public  bool GetSEMWorkingDistanceFromHW(ref double a_dWorkingDistance)
        {

            m_SemController.GetWorkingDistance(ref a_dWorkingDistance);


            return true;
        }
    

        // measure status
       public void SetMsrLoopStatus(otsdataconst.OTS_MSR_THREAD_STATUS a_nMsrLoopStatus)
        {
            if (a_nMsrLoopStatus >= otsdataconst.OTS_MSR_THREAD_STATUS.MIN && a_nMsrLoopStatus <= otsdataconst.OTS_MSR_THREAD_STATUS.MAX)
            {
                m_ThreadStatus.SetStatus( a_nMsrLoopStatus);
            }
        }

    
    }
}